6 replies to this topic

[sufaloofa]

My fantasy league has the following Roster Position Limits

Min. Starters
QB 1
RB 2
WR 2
TE 1
Flex(WR.TE,RB) 1
K 1
DST 1

Max on Roster
QB 3
RB 7
WR 7
TE 3
Flex(WR.TE,RB) NA
K 1
DST 1

Max Roster is 16


My question is what should my setup be? This is what I currently have.

Starters per Team
QB 1, RB 2, WR 2, TE 1, O-Flex 1, K 1, DST 1

Backups per Team
QB 1, RB 2, WR 2, TE 1, K 1, DST 1

Thanks in advance.

Sufaloofa

[Mike MacGregor]

That looks almost perfect sufaloofa. Since you are only allowed to hold a maximum of 1 K and 1 DEF on your roster, I would drop those backups to zero each. That gives 15 total players based on your other inputs. To account for the last backup, I would add 0.5 to QB, 0.25 to RB and 0.25 to WR, so backups would then be:

QB: 1.5, RB: 2.25, WR: 2.25, TE: 1, K: 0, DEF: 0

That should total 16 starters + backups.

Also make sure to check off that RB, WR and TE are included in the flex using the check boxes just below the starters and backups.

[TreyEleven]

Hey Mike I could use help with my setup as well plz. Just wanna make sure I did it right. My league has 9 starters 7 bench and 3 IR positions. 16 max roster.


Minimum starters:

QB - 1
RB - 2
WR - 2
TE - 1
Flex (RB,WR,TE) - 1
K - 1
DST - 1

We have a minimum roster requirement for each team where you MUST carry:

2 - QB's
3 - RB's
3 - WR's
2 - TE's
1 - K
1 - DST
4 - remaining roster positions are owners choice

So I set up my staters per team as I stated above, and my backups per team as follows: 1 QB, 2.5 RB, 2.5 WR, 1 TE, 0 K, 0 DST. I did also check to include RB,WR,TE in the FLEX. Is that correct??

Thanks for any and all help!

[Mike MacGregor]

That looks perfect. While a couple teams might draft a second K or Def, they really don't need to. I'd rather put more value to the other positions as you've done. Nice job.

[unloopme]

Hi Guys, looking for some setup help to maximize the DB's potential.

League 1
Start:
QB - 1
RB - 1
WR - 1
TE - 1
FLEX - 3 (RB/WR/TE)
K - 1
DEF - 1

Roster size = 14 (9 Start/5 Bench)
NO MAX AT ANY POSITION.

Current DB setup is:
Starter: QB1, RB1, WR1, TE1, K1, FLX3, DEF1
Bench: QB1, RB1.5, WR1.5, TE1, K0, FLX0, DEF0



League 2
Start:
QB - 1
RB - 2
WR - 2
TE - 1
FLEX - 1 (RB/WR)
K - 1
DEF - 1

Roster size = 16 (9 Start/7 Bench)
POSITION MAX: QB4, RB8, WR8, TE3, K3, DEF3

Current DB setup is:
Starter: QB1, RB2, WR2, TE1, K1, FLX1, DEF1 <<< fixed
Bench: QB1, RB2.5, WR2.5, TE1, K0, FLX0, DEF0

I of course have appropriate boxes ticked for flex positions.
I appreciate any and all help, this is my first year using DB so I'm pretty psyched!
Thanks

[Mike MacGregor]

Hi Guys, looking for some setup help to maximize the DB's potential.

League 1
Start:
QB - 1
RB - 1
WR - 1
TE - 1
FLEX - 3 (RB/WR/TE)
K - 1
DEF - 1

Roster size = 14 (9 Start/5 Bench)
NO MAX AT ANY POSITION.

Current DB setup is:
Starter: QB1, RB1, WR1, TE1, K1, FLX3, DEF1
Bench: QB1, RB1.5, WR1.5, TE1, K0, FLX0, DEF0



League 2
Start:
QB - 1
RB - 2
WR - 2
TE - 1
FLEX - 1 (RB/WR)
K - 1
DEF - 1

Roster size = 16 (9 Start/7 Bench)
POSITION MAX: QB4, RB8, WR8, TE3, K3, DEF3

Current DB setup is:
Starter: QB1, RB1, WR1, TE1, K1, FLX3, DEF1
Bench: QB1, RB2.5, WR2.5, TE1, K0, FLX0, DEF0

I of course have appropriate boxes ticked for flex positions.
I appreciate any and all help, this is my first year using DB so I'm pretty psyched!
Thanks

Thanks for trying out Draft Buddy this year unloopme. League 1 looks okay but I might change the backups to RB = 1.5, WR = 2, TE = 0.5, so as not to overrate TE too much.

League 2 I think you copied the starters from League 1. Starters should be:

QB = 1, RB = 2, WR = 2, TE = 1, O-Flex = 1, K = 1, DEF = 1

Then for the 7 backups I would go with:

QB = 1, RB = 2.5, WR = 2.5, TE = 1 ... Yep, just what you have, that looks good.

[unloopme]

Thanks for trying out Draft Buddy this year unloopme. League 1 looks okay but I might change the backups to RB = 1.5, WR = 2, TE = 0.5, so as not to overrate TE too much.

League 2 I think you copied the starters from League 1. Starters should be:

QB = 1, RB = 2, WR = 2, TE = 1, O-Flex = 1, K = 1, DEF = 1

Then for the 7 backups I would go with:

QB = 1, RB = 2.5, WR = 2.5, TE = 1 ... Yep, just what you have, that looks good.

Thanks for that fast reply, Mike!
Your right about the 'copy paste' job there in my post, my bad.
I'll make the adjustments you recommended, much appreciated!