Boss Hoggy 0 Posted August 2, 2002 have one rb one wr and 3 rb/wr flex starting positions in our setup. how do i account for that? :confused: [ 08-02-2002: Message edited by: Boss Hoggy ] Share this post Link to post Share on other sites
Mike MacGregor 20 Posted August 2, 2002 Are you a Dukes of Hazard fan Boss? Anyway, there is not an explicit flex option in the Compiler, but this is easily overcome by using decimal points to approximate the flex positions you expect the league to use. In your case, you might use 2.5 RB and 2.5 WR starters (1 RB + 1.5 flex RB and 1 WR + 1.5 flex WR). Or if you think most teams will go with 2 RB, 4 WR, then you can put those variables in the parameters tab starters/backup table. Try different options and see which you think is the most reasonable. Remember to re-compile the cheatsheets each time you make any changes to the parameters sheet. Good luck. [ 08-02-2002: Message edited by: Mike MacGregor ] Share this post Link to post Share on other sites