DailyRich 0 Posted August 9, 2011 My league allows us to start 2 RBs and 3 WR/TEs or 3R RBs and 2 WR/TEs. Is there a good way to reflect this on Rules tab? Share this post Link to post Share on other sites
Mike MacGregor 20 Posted August 9, 2011 That is what the O-Flex position is for Rich. You'll want to set up your starters like this: RB = 2, WR = 2, TE = 0, O-Flex = 1 Combine WR + TE = yes Make sure to check that RB, WR and TE are included in the Flex (options just below the backups). Note the cells for the backups line under O-Flex is not meant to be used. That is why it isn't highlighted yellow. Split your RB and WR/TE backups as you think most teams will draft under the RB and WR headings. You can use decimals too, if appropriate. Say, for example, you would expect 5 backups to those positions and half the teams draft 3 RB (2 WR) and half draft 2 RB (3 WR). Put the backups as 2.5 RB and 2.5 WR. Still 0 for TE backups since your league is combining them with WR, but make sure to set both the WR and TE scoring on the scoring tab. Share this post Link to post Share on other sites