lostsoulny 2 Posted August 31, 2017 One of my leagues does some odd scoring and I was wondering the best way to get it into draft buddy. Currently I have it set for 1 point for every 30 yards which brings it close but doesn't line up exactly with the scoring listed below. Total Passing Yardage 1 rule defined:For position: QBs 1 bonus point(s) for 30 to 59 total yards. 2 bonus point(s) for 60 to 89 total yards. 3 bonus point(s) for 90 to 119 total yards. 4 bonus point(s) for 120 to 149 total yards. 5 bonus point(s) for 150 to 179 total yards. 6 bonus point(s) for 180 to 209 total yards. 7 bonus point(s) for 210 to 239 total yards. 8 bonus point(s) for 240 to 269 total yards. 9 bonus point(s) for 270 to 299 total yards. 14 bonus point(s) for 300 to 329 total yards. 15 bonus point(s) for 330 to 349 total yards. 18 bonus point(s) for 350 to 389 total yards. 19 bonus point(s) for 390 to 419 total yards. 20 bonus point(s) for 420 to 449 total yards. 21 bonus point(s) for 450 to 479 total yards. 22 bonus point(s) for 480 to 509 total yards. 23 bonus point(s) for 510 to 539 total yards. 24 bonus point(s) for 540 to 569 total yards. 25 bonus point(s) for 570 to 599 total yards. 26 bonus point(s) for 600 to 600 total yards. Share this post Link to post Share on other sites
Mike MacGregor 20 Posted August 31, 2017 Looks pretty darn close to 1 per 30 until you hit 300 yards. Then it jumps up. I would keep it at 1 per 30 and then also use 4 FPts Per 1 "300+ PaYd game". There seem to be some other bumps at higher yardage, but since those will rarely be hit I wouldn't worry about them too much. Share this post Link to post Share on other sites
lostsoulny 2 Posted August 31, 2017 Sounds good Thanks. Share this post Link to post Share on other sites